The Mark IV Industrial TrimMaster®, featuring new Power Lock™ Bar and POWERslot™ technology, provide easy setup and operation in the shop and on the job site. Non-marring vinyl strips protect metal finishes leaving clean crisp bends and hems. Our unique cam-locking system clamps to the thickness of the material and not to a factory preset. Should you ever need to fine-tune your brake, each casting comes with independently adjustable UHMW plastic wedges. While some brake manufacturers have taken away your ability to make these adjustments, its nice to know TrimMaster® gives you the choice, even if you never have to use it.
Mark IV Industrial Trimmaster®
Bend and Hem 24, 26, and 29 gauge painted steel onsite.
Features & Benefits
Hover ⁄ click for product features.
1. Locking Handle
Full loop locking handle secure locks by pushing handle away from user. This allows handle to not interfere with material when bending larger pieces. Has quick release handles for easy transportation.
2. Power Lock™ Bar
Provides stronger clamping pressure along entire bending edge for crisp, clean bends without oil canning⁄ warping.
3. Cam Locking System
Van Mark has engineered the most effective and practical method for locking material on a bending brake. This patented design consists of an Aluminum Cam with a Ultra High Molecular Weight Polyethylene wedge.
4. Military Grade Aluminum Castings
Each clamping station uses TWO Military Grade Aluminum Castings. The dual castings provide a strong and solid clamping pressure. This design has been time-tested and endured.
5. Dual Support Base Rails
All Van Mark brakes come standard with TWO full base rail extrusions that provide a solid foundation. Inhibits twisting and torqueing while bending.
6. POWERslot™ Hinge
Durable hinge that "auto-measures" 5 ⁄ 8" hem with ease. This hinge design provide increase bending strength.
7. Bending Handle
Dual full loop bending handle connects a 2-4 integrated contact points allowing for straighter, more even bends with one hand operation. Ideal for bending and hemming full length (8ft +) pieces.
8. Xtreme Stand™ (Included)
Xtreme Stand™ sets up and disassembles in minutes with 6 fas pins.
Power Lock™ Bar
Provides stronger clamping along the entire bending edge for crisp, clean bends without oil canning, or warping.
Full 150° bending radius
Makes the second step of "hemming" to 180° even easier
Stronger yet Lighter Castings and Pivot Arms
Our castings and pivot arms are 5% lighter yet 10% stronger than our original. Adds life to the casting and produces more precise bends.
SPECIFICATIONS
* dual bending handles ** dual bending & Locking handles
* Capacities are based on standard metal properties for coil & sheet. Please contact our factory for capacities on your specific material.
Model Line:
Mark IV Industrial Trimmaster
Throat Depth:
14"
Hinge Type:
POWERslot™ Click here to learn more
Stand Options:
Xtreme Stand™ Included; Click here for Stands
Warranty:
1 Year
CORE SPECS
Model
Length
Castings
Weight
IT6-S
6'6" (1.98 m)
7 ea.
144 lbs (65.5 kg)
IT8-S
8'6" (2.59 m)
9 ea.
182 lbs (82.7 kg)
IT10-S*
10'6" (3.20 m)
11 ea.
211 lbs (95.9 kg)
IT12-S**
12'6" (3.81 m)
13 ea.
250 lbs (113.6 kg)
IT14-S**
14'6" (4.42 m)
15 ea.
291 lbs (132.3 kg)
BENDING CAPACITIES*
Material
Maximum Thickness
Aluminum (3003H14)
.050"
Galvanized Steel
20 ga.
Painted Steel (Grade D)
24 ga.
Roofing Copper
36 oz. soft
Zinc
.050" soft
Stainless Steel (304L)
24 ga.
WARRANTY
1 Year Manufacturer's Limited Warranty
Van Mark Products Corporation warrants this product against defects in material or workmanship for or a period of 1-year from the date of original purchase. For details, click here.
DOCUMENTS & VIDEOS
Parts List
Xtreme Stand Setup
Bending Guide
Metal Roofing Bending Guide
Most fasteners used in Van Mark tools are standard off-the-shelf nuts & bolts. This was intentional. We use standard fasteners to allow you to get back to work more quickly if something goes missing. Using standard replacement hardware like nuts, bolts & pull-pins will not affect your warranty. For more information, please contact Van Mark directly.
For Sales Literature on our Brakes and Accessories, see our Media Package page
Documents
Videos
Parts ListXtreme Stand SetupBending GuideMetal Roofing Bending GuideMost fasteners used in Van Mark tools are standard off-the-shelf nuts & bolts. This was intentional. We use standard fasteners to allow you to get back to work more quickly if something goes missing. Using standard replacement hardware like nuts, bolts & pull-pins will not affect your warranty. For more information, please contact Van Mark directly.
For Sales Literature on our Brakes and Accessories, see our Media Package page