The Trim-A-Table™ 60 is engineered to be the ultimate siding saw table. Ever since the original Trim-A-Table™ was introduced, we have been exploring new ways to make our saw table the absolute best. As materials got wider, so did our saw table. The 6’ Boom ⁄ Saw Track Assembly allows the user to cut shaper angels and greater widths. To improve the speed and efficiency of the user, we added material stops for desired length and memory stops for the desired angle ⁄ pitch. Whether you are cutting vinyl siding, soffit, or fiber cement, the Trim-A-Table™ 60 is the perfect piece of equipment to get your job done fast.
Easy to use controls with adjustments always in reach
Dual Wing Supports extend working surface to 16” for wider material.
Dual Table Extensions provide material support up to 18’ long.
Dual Scale Protractor that provides angles and pitches
Fully captures 7” - 8” circular saws
Trim-A-Table™ TAT60
Versatile panel and siding saw table to accurately various angles and pitches that offers a 6-Foot Boom
*Model shown with the optional Steel Folding Legs. Power saw not included.
Features & Benefits
Hover ⁄ click for product features.
1. Boom Length
6’ “big boom” for cuts as shallow as 2 ⁄ 12 pitch.
2. Easy controls
Controls and adjustments are always in reach. The single-point locking control ensures multiple positioning of the boom without bending or reaching into the path of the saw to make adjustment.
3. Tape measure
Built-in tape measures allow easy measurement, that is both quick and accurate.
4. Circular Saw (Not Included)
The Trim-A-Table™ allows you to use the 7 ¼" circular saw that you are most comfortable with. Saw can be “dropped” in place ready to go and just as easily removed for transport and storage.
5. Rear Fence
Rear fence helps keep material squared and straight. Can be adjusted left and right to accommodate longer materials. Can also be removed to accommodate wider materials as well.
6. Memory Stop
Memory stops allow quick-change of the boom position without having to reset angle.
7. Dual deck extensions
Dual extensions provide up to 18 feet of material support and have built in tape rules for quick referencing of most measurements.
8. Dual Support Wings
Dual wing supports can be positioned along the top decks to provide up to 16 inches of support.
9. Dual Feature Protractor
Provides both degree and pitch angles. Works both left and right
10. Recessed Saw Track
Recessed saw blade track which means you get full material support on both sides of the blade while never cutting through the table-top
Easy Portability
lightweight and sets up fast on any job site or in the shop. Durable aluminum components, along with stringent manufacturing controls ensure the longest service life of any saw table out there. Entire unit breaks down quickly for single-user portability and setup.
Recessed Saw Track with Quick “Drop-In” Feature
6 foot “big boom” for cuts as shallow as 2 ⁄ 12 pitch and has a recessed saw blade track which means you get full material support on both sides of the blade while never cutting through the table-top. For convenience, your saw can be “dropped” in place ready to go and just as easily removed for transport and storage
Memory Stops
Ensures accurate cuts with the built in protractor and pitch guide. Memory stops allow quick-change of the boom position without having to reset angle.
WARRANTY
1 Year Manufacturer's Limited Warranty
Van Mark Products Corporation warrants this product against defects in material or workmanship for or a period of 1-year from the date of original purchase. For details, click here.
DOCUMENTS & VIDEOS
Parts List
Most fasteners used in Van Mark tools are standard off-the-shelf nuts & bolts. This was intentional. We use standard fasteners to allow you to get back to work more quickly if something goes missing. Using standard replacement hardware like nuts, bolts & pull-pins will not affect your warranty. For more information, please contact Van Mark directly.
For Sales Literature on our Brakes and Accessories, see our Media Package page
Documents
Videos
Parts ListMost fasteners used in Van Mark tools are standard off-the-shelf nuts & bolts. This was intentional. We use standard fasteners to allow you to get back to work more quickly if something goes missing. Using standard replacement hardware like nuts, bolts & pull-pins will not affect your warranty. For more information, please contact Van Mark directly.
For Sales Literature on our Brakes and Accessories, see our Media Package page